Bldg: 640, Rm 211
Email: cacm.medialab@kennesaw.edu


Fall/Spring:
Mon 鈥 Fri; 9am 鈥 5pm

Summer: 
Mon 鈥 Fri; 9am 鈥 5pm 

David Easterwood
Digital Media Supervisor

 

faculty memeber working in materials lab

The KSU College of Architecture and Construction Management (CoACM) Media Lab is located on the Marietta campus on the 2nd floor of the Architecture (640) building. The lab houses professional grade plotting and scanning equipment for large format printing and scanning, as well as a small photography studio with professional lighting and backdrops suitable for documenting physical models and other furniture and design projects. All active students and faculty have access to the lab鈥檚 resources and equipment for class projects and research.

  • The KSU College of Architecture and Construction Management (CoACM) Media Lab is located on the Marietta campus on the 2nd floor of the Architecture (640) building. The lab houses professional grade plotting and scanning equipment for large format printing and scanning, as well as a small photography studio with professional lighting and backdrops suitable for documenting physical models and other furniture and design projects. All active students and faculty have access to the lab鈥檚 resources and equipment for class projects and research.

    For current college students, more information on how to access these resources can be found in the Plot Submission page and Scanner/Photo Reservation page.

    The lab is fully staffed by professional technicians during operational hours and includes the following equipment:

    • Plotters 鈥 Hewlett Packard large format plotters handling a variety of paper types up to a width of 42鈥.
    • Scanners 鈥 Hewlett Packard Roll-Feed Scanner which can accommodate media up to a width of 42鈥 and Epson Flat-Bed Scanners which can accommodate media up to 12.25鈥漻17.25鈥.
    • Paper Trimmers 鈥 Alvin Paper Trimmers which can accommodate media up to a width of 58鈥.
    • Photography Studio 鈥 Arri 150 and 300 Photo Lamps and 53鈥 wide backdrops in both black and white.
  • Scanners

    Roll-Feed Scanner Policy and Usage Guide
    Flat-Bed Scanner Policy and Usage Guide

    Photo Studio

    Photo Studio Usage Guide

    Scanners and photography equipment appointments can be made at the online scheduler .

  • CoACM students and faculty may utilize the lab facilities within operational hours and are responsible for reviewing the provided policy and usage guides prior to handling of equipment.

    Plot Submissions

    • CACM students get an allotment of 100 square feet of free printing.  After that allotment is used, students will be charged $0.50/square foot (for example, Arch C 18"x24" = 3 square feet = $1.50, Arch D 24"x36" = 6 square feet = $3.00, Arch E 36"x48" = 12 square feet = $6.00.
    • By submitting a plot submission, you must have read and understand the Plot Submission Policy and Guide in the link below.
    • Plot submissions MUST come from your @students.kennesaw.edu email address and be sent to the cacm.medialab@kennesaw.edu email address.
    • Plot Submissions should be in PDF format
    • Plot Submissions should be at 150dpi resolution
    • Plot Submissions should be at the correct scale
    • Plot Submissions should be at the correct paper size
    • Plot Submissions should use Arch Standard paper sizes (18鈥漻24鈥, 24鈥漻36鈥, 30鈥漻42鈥).  24鈥漻24鈥 or 24鈥漻48鈥 are also acceptable, as that is the format used for hall displays.
    • Plot Submissions are normally printed on bond paper.  Vellum is sometimes used for construction document printing.  Photo paper is reserved for competition and scholarship submission printing.
    • Plot Submission Policy and Guide 
    • Reservations to bring your own paper and plot yourself can be made at the online scheduler .

Frequently Asked Questions

  • Non-CoACM students are not normally permitted to utilize the plotters, as consumables such as ink and paper are funded through CoACM specific lab fees. Special requests to assist other departments for special events for the University are handled on a case by case basis. Priority is given to Architecture and Construction Management students.
  • No, since plotting consumables are paid for by CoACM specific lab fees, there is no way to handle personal projects on a pay per print basis. All printing/plotting should be to support Architecture and Construction Management courses specifically.  Exceptions would be for Design Competitions or Scholarship submissions.
  • The roll-feed scanners are designed for scanning ink and blueline prints.  Any media which can rub off can damage the feed rollers and scanning platen, resulting in damage to media subsequently sent through the roll-feed scanner.  Spray fixative does not solve the problem, it only makes it worse, as it is a glue material which remains sticky and gums up the feed rollers.  Any drawings which are not ink or blueline drawings must be placed in an acetate sleeve, provided by the student, before going through the roll-feed scanner.
  • No, the lab is open Monday 鈥 Friday from 9am 鈥 5pm.